iOLab Kit

For Scientists & Engineers

 

To save instructors the time and energy otherwise spent writing experiments and finding additional equipment to use with the device, we offer the iOLab Kit for Scientists and Engineers.

Students can order the kit directly through our Student Store and ship it to their homes or dorms, allowing instructors to worry more about supporting their students learning physics and less about coordinating equipment.

Kit Contents

Item Bag Amount
Steel Drywall Screw A 1
0.5 Ohm 1% 5 Watt Resistors A 2
1 Ohm 1% Resistors A 3
4.7 kOhm 1% Resistors A 2
10 kOhm 1% Resistors A 2
0.47 uF Capacitor A 2
0.22 uF Capacitor A 2
56 uF Capacitor A 2
200 uF Capacitor A 2
100 mH 82 Ohm Inductor A 1
Vibration Motor A 1
Copper Foil Tape with Conductive Adhesive A 1 yd
24 AWG solid hookup wire B 12 ft
DMS Mouline 25 thread B 1
Tape Measure 5ft B 1
Laser 5 mW 532nm B 1
Protractor 6in B 1
Semicircular Refraction Dish B 1
Neodymium Magnets B 3
AA Battery Holder C 1
Breadboard Solderless 400 tie C 1
Jumper Wire C 1
3.5 mm audio jacks C 2
3.5 mm cable male-male C 1
D cell holder C 1
AAA battery Holder C 1
Resistive Paper Paper 1

Bag A

  • Steel Drywall Screw
  • Two 0.5 Ohm 1% 5 Watt Resistors
  • Three 1 Ohm 1% Resistors
  • Two 4.7 kOhm 1% Resistors
  • Two 10 kOhm 1% Resistors
  • Two 0.47 uF Capacitor
  • Two 0.22 uF Capacitor
  • Two 56 uF Capacitor
  • Two 200 uF Capacitor
  • 100 mH 82 Ohm Inductor
  • Vibration Motor
  • 1 yard Copper Foil Tape with Conductive Adhesive

Bag B

  • 12 feet of 24 AWG solid hookup wire
  • DMS Mouline 25 thread
  • Tape Measure 5ft
  • Laser 5 mW 532nm
  • Protractor 6in
  • Semicircular Refraction Dish
  • Three Neodymium Magnets
 

Bag C

  • AA Battery Holder
  • Breadboard Solderless 400 tie
  • Jumper Wire
  • Two 3.5 mm audio jacks
  • 3.5 mm cable male-male
  • D cell holder
  • AAA battery Holder 

Paper

  • Resistive Paper

Have Questions?

Contact Us

Ready to Purchase?

Order iOLab

Ready to use your iOLab?

Get Started